Automatic Flute Laminating Machine Protection And Maintenance

The automatic flute laminating machine should pay attention to its protection. More protection will extend its service life and save costs for enterprises. The company takes you to understand how to protect our laminating machine in daily life:

1. The automatic flute laminating machine fills the butter on both ends of the rubber roller every week. Since the glue used in the laminating machine is strongly alkaline and has a certain corrosiveness to the bearings at both ends, it is required to add butter every week, and the bearings at both ends of the other rollers Can be filled with butter once every six months or oil once every three months

2.The automatic flute laminating machine Feida needs to check whether the air pump needs to be filled with oil every month. Once the oil is cut off, it is easy to cause the air pump to get stuck.

3. After the automatic high-speed paper laminating machine is used, it is necessary to strictly clean the glue tray, and at the same time, it is necessary to completely clean the glue pipeline. When cleaning the laminating machine pipeline, it is equivalent to cleaning the glue pump, so as to extend the service life of the glue pump of the paper laminating machine.

4. Before starting the fully automatic flipping paper laminating machine, first check the parallelism of the rubber roller, and it cannot be stuck. The rubber roller requires high precision. At the same time, it is recommended to open the roller before starting the laminating machine, and then apply glue.

5.Pay attention to the maintenance of the rubber roller of the automatic high-speed laminating machine, and the double-sheet flexure of the single-sided corrugated machine cardboard enters the equipment. The long-term double-sheet flexure phenomenon will cause damage to the rubber on the surface of the rubber roller, and severe bending of the rubber roller. If it is not serious, the rubber roller should go back to the grinding machine to correct the outer circle.

6.The important thing is that if there is abnormal noise in the production process of The automatic flute laminating machine, stop the laminating machine at any time and check the reason for the noise, and notify the manufacturer in time and repair it.